Replaced by UTC 2412RVEB for most applications.
Trailer electrical interface converts from 24 volt Military standard (MS75021-1) connector to 12 volt civilian standard (Pollack 12-707) 7 way connector. This allows towing a civilian trailer with a Military vehicle.
Converter is made in USA. We are an authorized factory distributor and the product includes a 2 year manufacture's warranty.
UTC 2412RV Specifications:
Inputs: 21-29 Volts DC (will withstand 36 Volts DC)
Input current: 45 Amps max total
Number of converters per unit: 5 (3 control basic lights, extra 2 allow for aux uses and electric brakes, see i/o listing below)
Output: 13.6 Volts DC +/- 0.3 VDC
Output current capability on each of the 3 main converters: 10 Amps/15 Amp Surge.
Output current capability on each auxiliary converter: 15 Amps
Output power: 800 Watts max total
Overload and short circuit protection: electronically controlled
Efficiency: 90 percent typical
Aluminum housing with steel end caps.
Mounting holes (6) for 1/4 inch hardware.
Overall Length: 21-1/4 inches
Overall Height: 4-3/4 inches
Overall width: 8-11/16 inches
Sealed case protects against water and dust.
Input connector configuration:
A- not used
B- left turn/brake
C- not used
E- tail light/clearance light
F, H - not used
J- right turn/brake
K- 24 volt aux 1 input
M- 24 volt aux 2 input
N- not used
Output connector configuration:
1 - ground
2- 12 volt aux 2 out
3- tail light/clearance light
4- 12 volt aux 1 out
5- left turn/brake
6- right turn/brake
7- not used
Note: unit is not a trailer brake controller. Electric brakes, if used, must have their own controller installed. See model UTC 2412RVEB which is designed for use with electric brakes.
See p/n PK12716 to change from the output 7 way to the 4 way plug.
See p/n 7728814 or 7728811 for intervehicular input cable.
See p/n MS75020-2 for mating input plug.
20 lb shipping weight