Model SSV 600-24 is a high efficiency inverter which converts 24 Volts DC to 600 Watts of pure sine wave AC power at 120 Volts, 60 Hz. Features include overload protection, low battery alarm / shut down, reverse polarity protection, over/under voltage protection, and low idle power draw. Can be remotely switched on/off. AC power is available from dual GFCI protected receptacles on the front panel. The front-end status lights show power on, overload fault and overtemp fault.
This power inverter’s features and quality combined with an unbeatable price make it a popular choice with our customers. It’s compact mounting footprint allows easy installation under seats, in campers, or simply carried to a job site.
Input Volts: 22-30 VDC
Output Watts: 600 max continuous
High output power surge capability of 1000 Watts to start motors and incandescent lamps
Output Volts: 120 VAC; 60 +/- 0.5 Hz
Input Amps at 600 Watt load: 30 max
Efficiency: 85% minimum
Thermostatically controlled fan only turns on when needed
Output waveform: pure sine wave
Output regulation: 3%, no load to full load
Low idle power draw: less than 0.5 Amps
Two output receptacles with GFCI protection.
Dimensions (L x W x H): 11” x 9.5” x 3.0”
Pure sine wave output power is the same as normal utility power. The inverter is capable of powering sensitive electronic devices that may not tolerate the modified stepped sine wave. Generally a device that uses control circuitry that senses the phase (for voltage /
speed control) or instantaneous zero voltage crossing (for timing control) will need a true sine wave inverter.
Contact us if you need help choosing the proper inverter for your application.